Bar table. Metal. Height 1100 mm. (110 cm), Height 820 mm (82 cm), Height 710 mm (71 cm), Height 400 mm (40 cm). Can be used for bar counters, tables or work surfaces . Made from profile pipe 50x25 mm, thickness 1.5 mm. The thickness of the metal on the mounting plate under the tabletop is 3 mm. We increased its size to 120 mm, which increases the stability of the furniture structure. This also makes it possible to eliminate cases of self-tapping screws being torn out of the tabletop under loads on the surface. The joints of pipes or sheet metal are always welded along the entire perimeter. Это обеспечивает особую прочность. Покраска осуществляется с полным циклом подготовки поверхности с соблюдением технологии. This provides special strength. Painting is carried out with a full cycle of surface preparation in compliance with technology. This ensures good adhesion of the paint to the metal surface. It holds well and does not chip when struck. Resistant to mechanical stress. We use paint only from the German manufacturer AkzoNobel. This brand provides consistent quality. Beautiful texture and color. The underframe is equipped with threaded supports that allow you to adjust the height and level relative to the floor. The threaded supports themselves are made of high-strength plastic and a threaded steel pin. Does not scratch the floor covering. The support for the bar counter is produced in accordance with the technical documentation